TOSHIBA DKT2000-Series

Call Waiting Tone Controls

TOSHIBA IPT1000, IPT2000, DKT3000, DKT3200, DP5000, IP5000 Series

Your telephone has one rocker volume (Vol) button for controlling speaker and handset volume levels. One side of this button has a symbol that points up, and the other side has a symbol that points down. To increase any of the volume levels, press and hold the upward pointing arrow; to decrease any of the levels, press and hold the downward pointing arrow.

IMPORTANT!

Either button must be held down for at least 1/8 of a second for any volume change to occur. If either button is continually held down, the volume will continually change about every 1/2 second until the level limit is reached or the button is released.

HANDSET RECEIVER VOLUME

The procedure in the left-hand column describes how to adjust the volume level of your handset receiver.

To Adjust Handset Receiver:

  1. While on an off-hook call, press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.

NOTE: After a call is terminated and the handset is placed on-hook, the handset receiver volume level will return to the original preset level for the next call.

SPEAKER VOLUME

The procedure in the left-hand column explains how to adjust the speaker volume level for calls originated on-hook from your station, intercom and CO dial tone, and Background Music.

To Adjust Speaker While Idle:

  1. Press the Spkr button.
After you press Spkr button, you will press an ext. button.
  1. Press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.
This volume setting applies to all calls until changed.

 

  1. Release the button when the desired volume is set.

RING TONE, ANSWERBACK, CALL ANNOUNCE VOLUME

Adjust the ring tone volume with the procedure in the left-hand column, which also changes the volume level of incoming Handsfree Answerback calls and Speaker Off-hook Call Announce.

To Adjust Ring Tone:

  1. Ensure that the handset is on-hook.
You can adjust the ring tone only if the handset is on-hook and the telephone is in the idle state.
  1. Press and hold down the Vol button.
You will hear ring tone as long as you press the button. Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired ring volume is set.
This procedure will also change the volume level of a caller’s voice on Handsfree Answerback calls to your telephone.

HANDSET BEEP TONE VOLUME

To Adjust Beep Tone:

  1. With the handset off-hook
Dial the Beep Tone Adjustment Code #6101 (default code), you will hear a busy tone.
  1. Release the button when the desired volume is set.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.

Need phone support?