Each line and feature button have a Light Emitting Diode (LED) next to it which indicates the status of the line or feature associated with the button.
LINE BUTTON LED INDICATIONS
Line LEDs light as red or green and flash at varying rates to indicate call status.
Line In-use—When you access an outside line, the LED will appear at your station as follows:
- Flash rate: 2 seconds on—1/8 second off—1/8 second on/off
- Color: Green
- Other stations with the Line: Steady, red
Incoming Call—While an incoming call is ringing your station, the Line LED will appear at your station as follows:
- Flash rate: 1second on at 10 pulses per second—1 second off
- Color: Red for direct calls, green for transferred calls
- Other stations with the Line: 1 second on/off, red
On Hold—When you place an outside line on hold, the Line LED will appear at your station as follows:
- Flash rate: 4 pulses per second for 1/8 second on—1/8 second off
- Color: Green
- Other stations with the Line: 1/2 second on—1/2 second off, red
NOTE: If using a pooled line button, the hold indication is only at the station that places the call on hold.
Consultation Hold—During a consultation or during transfer to another station, the Line LED will appear at your station as follows:
- Flash rate: 10 pulses per second
- Color: Green
- Other stations with the Line: steady, red
Exclusive Hold—When you place an outside call on Exclusive Hold, the Line LED will appear at your station as follows:
- Flash rate: 10 pulses per second
- Color: Green
- Other stations with the Line: Steady, red
Hold Recall—When a held call is recalling your station and your station is idle, the Line LED will appear at your station as follows:
- Flash rate: 2 pulses per second for 1 second—10 pulses per second for 1 second
- Color: Green
- Other stations with the Line: Flashes, red
Exclusive Hold Recall—When an Exclusive held call is recalling your station and your station is idle, the Line LED will appear at your station as follows:
- Flash rate: 2 pulses per second for 1 second—10 pulses per second for 1 second
- Color: Green
- Other stations with the Line: Steady, red
Internal/Intercom Call—While another station is ringing your station, your Intercom LED will appear as follows:
- Flash rate: 10 impulses per second for 1 second—1 second off
- Color: Green
- Other stations with the Line: Steady, red
Busy Station Transfer—When an outside call is transferred to your station (from a designated station or Auto Attendant) when you are busy on another call, the Line LED will appear at your station as follows:
- Flash rate: 4 pulses per second 1/8 second on/off
- Flash rate after disconnecting first call: 10 pulses per second
- Color: Green
- Other stations with the Line: 3/4 second on—1/8 second off, red
- Other stations after disconnecting first call: 2 pulses per second
FEATURE BUTTON LED INDICATIONS
Most of the feature buttons have LEDs, and most of these LEDs light red when activated. Some of these LEDs will also flash as red when activated.