TOSHIBA DKT2000-Series

Volume Control Details

Your telephone has two volume (Vol) buttons for controlling speaker and handset volume levels. One of these buttons has a symbol that points up, and the other has a symbol that points down. To increase any of the volume levels, press and hold the upward pointing arrow; to decrease any of the levels, press and hold the downward pointing arrow.

IMPORTANT!

Either button must be held down for at least 1/8 of a second for any volume change to occur. If either button is continually held down, the volume will continually change about every 1/2 second until the level limit is reached or the button is released.

RING TONE VOLUME (INCOMING HANDSFREE ANSWERBACK)

Adjust the ring tone volume with the procedure in the left-hand column, which also changes the volume level of incoming Handsfree Answerback calls before they are answered by pressing the Intercom button.

To Adjust Ring Tone:

  1. Ensure that the handset is on-hook.
You can adjust the ring tone only if the handset is on-hook and the telephone is in the idle state.
  1. Press and hold down the Vol button.
You will hear ring tone as long as you press the button. Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired ring volume is set.
This procedure will also change the volume level of a caller’s voice on Handsfree Answerback calls to your telephone.
. . . or . . .
  1. Ensure that the handset is on-hook.
  1. Press the Intercom button and dial 6 1 0 2.
After you press the Intercom button and dial 6 1 0 2, your phone will ring for 15 seconds or until disconnected by pressing the Spkr button.
  1. Hold down the Vol button until the desired volume is set.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume. This procedure will also change the volume level of a caller’s voice on Handsfree Answerback calls to your telephone.

INCOMING HANDSFREE ANSWERBACK VOLUME (RING TONE)

Adjust the volume level of incoming Handsfree Answerback calls before they are answered by pressing the Vol button with the procedure in the left-hand column. This procedure will also change the ring tone volume.

To Adjust Handsfree Incoming Call:

  1. While receiving a handsfree intercom call, press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.

HANDSET RECEIVER VOLUME

The procedure in the left-hand column describes how to adjust the volume level of your handset receiver.

To Adjust Handset Receiver:

  1. While on an off-hook call, press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.

NOTE: After a call is terminated and the handset is placed on-hook, the handset receiver volume level will return to the original preset level for the next call.

SPEAKER VOLUME

The procedure in the left-hand column explains how to adjust the speaker volume level for calls originated on-hook from your station, intercom and CO dial tone, Background Music, and Off-hook Call Announce.

To Adjust Speaker While Idle:

  1. Press the Intercom button.
After you press the Intercom button, you will hear dial tone.
  1. Press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.
You can stop the dial tone by pressing the Spkr button.

To Adjust Speaker While on an On-hook Call:

  1. Press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.

MUTED TONE BURST VOLUME

The procedure in the left-hand column describes how to adjust the volume of the muted tone burst sent to your telephone with a several features, including Busy Override, Do Not Disturb, and Call Transfer with Camp-on.

To Adjust Muted Tone Burst:

  1. Press the Intercom button and dial 6 1 0 1.
After you dial 6 1 0 1, you will hear the muted tone for 15 seconds or until disconnected by pressing the Spkr button.
  1. Press and hold down the Vol button.
Press the down arrow volume button to decrease the volume or press the up arrow button to increase the volume.
  1. Release the button when the desired volume is set.

Need phone support?